SPECIFICATIONS

Microneedle Length: <0.25mm

Power Source: Electric

Number of Pieces: One Unit

Products Name: derma pen L3

Preparation

Remove the needle cartridge from the sterilized package.

Fit the round notches 1 into the machine's 2, slide the needle cartridge horizontally up to the end.

Lock the cartridge by turning it counterclockwise.

Needle length adjustment should be done after the machine has been turned on.

If you want to remove the needle cartridge, turn it clockwise and push it out horizontally, aligning round notches (slot 1.slot 20slot).

Needle length adjustment

You can adjust the length of the needle by turning the adjustment ring clockwise or counterclockwise. If you turn it clockwise, it will become longer. If you turn it counterclockwise, it will become shorter.

Adjusting speed and needle length

Speed ​​adjustment and ON/OFF

5 Speed ​​level control

If you press the power switch for 2 seconds to open the device, it will start from the lowest speed to the highest speed when you first turn on the power. The speed will switch from low to high. Press the power switch for 2 seconds when you need to stop the device.

The faster the flicker frequency of the light, the higher the speed.